Page 5
A s s e m b l y S t e p 1
Hardware & Tool Required
#14. Carriage Bolt (M8x45 mm)
[4 Pieces]
Washer
Front & Rear Stabilizer Assembly
With the help of an assistant, attach the
Front Stabilizer
(#03)
to bracket at the front of
Main Frame (#01)
. Insert two
Carriage Bolts (#14)
through the
Front Stabilizer (#03)
followed by the front
Main Frame (#01)
. Secure them
together using two
Washers (#20)
and two
Nuts (#19)
.
Now attach the
Rear Stabilizer (#02)
to the bracket at rear
of
Main Frame (#01)
. Insert two
Carriage Bolts (#14)
through the
Rear Stabilizer (#02)
followed by the rear
Main Frame (#01)
. Secure them together using two
Washers
(#20)
and two
Nuts (#19)
.
USING THE ADJUSTABLE BOLTS
The
Adjustable Bolts (#13)
located on the bottom corners
are a security feature that allow you to adjust the height
of the bike in a case such as uneven floors. You should only
exercise on the bike if it is on an even plane to avoid serious
injury.
Slip one
Nut (#15)
on each
Adjustable Bolt (#13)
as shown
in the exploded diagram below. If necessary, turn the
Adjustable Bolt (#13)
until the desired position is reached
so that the bike is on a flat plane.
#20. Washer (M8)
[4 Pieces]
Nut
#19. Nut (M8)
[4 Pieces]
Tool
[1 Piece]
Bolt
55
40
1
2
3
4
55
40
1
2
3
4
STEP3:
Assembly Instructions
BF 718
