BF 620
Page 5
Make sure the wire is hanging out before proceeding
to the next step. If it has fallen inside the tube, use
a bent wire to “fish” it out.
A s s e m b l y S t e p 1
Hardware & Tool Required
Front & Rear Stabilizer Assembly
With the help of an assistant, attach the
Front Stabilizer
(#02)
to bracket at the front of
Main Frame (#01)
. Insert two
Carriage Bolts (#13)
through the
Front Stabilizer (#02)
followed by the front
Main Frame (#01)
. Secure them
together using two
Arc Washers (#14)
and two
Nuts
(#15)
. Now attach the
Rear Stabilizer (#03)
to the bracket
at rear of
Main Frame (#01)
. Insert two
Carriage Bolts (#13)
through the
Rear Stabilizer (#03)
followed by the rear
Main Frame (#01)
. Secure them together using two
Arc
Washers (#14)
and two
Nuts (#15)
.
Pedal Assembly
Screw the
Pedal [Left](#09L)
to the
Crank [Left] (#28L)
by
NOTE:
If labels designating the Left/Right Pedal are not
present, please check pedals
closely for embossed
“L”/ “R” letter marks. These will be “L” / “R” letters
that are raised on the pedal material.
turning
the bolt head on the
Pedal [Left](#09)
COUNTER-CLOCKWISE. Screw the
Pedal [Right](#09R)
to the
Crank [Right] (#28R)
by turning the bolt head on the
Pedal [Right](#09R)
CLOCKWISE...
Bolt
Washer
#13. Carriage Bolt (M8x60 mm)
[4 Pieces]
#14. Arc Washer
(M8)
[4 Pieces]
#15. Nut (M8)
[4 Pieces]
Nut
Tool
#39. Tool 2 (S13-14-15)
[1 Piece]
A s s e m b l y S t e p 2
NOTE:
Assembly Instructions
