A s s e m b l y S t e p 3
Page 7
Hardware Required
WASHER
#43. Washer (M8)
[2 Pieces]
#42. Washer (M10)
[8 Pieces]
#29. Quick Clip
#32. Hex Bolt (M10x115 mm)
[2 Pieces]
#33. Hex Bolt (M10x65 mm)
[1 Piece]
#36. Hex Bolt (M8x20 mm)
[2 Pieces]
[3 Pieces]
#28. Knob
(M10)
NUT
#39. Nylon Nut (M10)
[1 Piece]
OTHERS
BOLT
[2 Pieces]
A
B
C
A). Attach the
Leg Developer (#09)
by aligning the holes on bracket of
Front Upright (#05).
Secure them by using one
Hex
Bolt (#33)
through one
Washer (#42)
and an additional
Washer (#42)
followed by one
Nylon Nut (#39)
as illustrated.
B). Slide one
Foam Roller (#17)
onto one end of a
Foam Roller Tube (#12)
. Next, slide the same
Foam Roller Tube (#12)
through the lower hole of the
Leg Developer (#09)
as illustrated. Next, slide one more
Foam Roller (#17)
onto the other end
of the
Foam Roller Tube (#12)
(after it has been inserted through the lower hole).
Repeat this process with the other
Foam Roller Tube (#12)
and another two
Foam Rollers (#17)
through the upper hole on
the
Leg Developer (#09).
C). Attach the
Left Butterfly (#10)
to the
Left Upright (#01)
. Secure them by using one
Hex Bolt (#32)
through one
Washer
(#42)
,
Left Butterfly (#10)
, one
Washer (#42), Left Upright (#01)
and an additional
Washer (#42)
followed by one
Knob (#28)
as illustrated.
Attach the
Foam Roller Tube (Short)(#13)
to the
Left Butterfly (#10)
. Secure them by using one
Washer (#43)
and
Hex
Bolt (#36)
. Then, slide one
Foam Roller (#17)
onto the end of
Foam Roller Tube (short) (#13)
.
Repeat this process with the
Right Butterfly (#11)
, the other
Foam Roller Tube (short) (#13)
and
Foam Roller (#17)
to the
Right Upright (#02).
D). Attach the
(#11).
Quick Clips (#29)
to the weight plate tube on the
Leg Developer (#09),Left Butterfliy (#10)
and
Right Butterfly
* F O A M R O L L E R S
The
Foam Roller Tube (#12)
can be placed through either of
these two holes depending on your height. Simply remove one
Foam Roller (#17)
from one end to reposition the location of
the
Foam Roller Tube (#12).
.
55
40
1 2 3
4
55
40
1 2 3
4
STEP3:
Assembly Instructions
BCB 500
