Page 6
A s s e m b l y S t e p 2
Hardware Required
WASHER
#43. Washer (M8)
[10 Pieces]
#35. Hex Bolt (M8x55 mm)
[2 Pieces]
#36. Hex Bolt (M8x20 mm)
[4 Pieces]
NUT
#40. Nylon Nut (M8)
[4 Pieces]
BOLT
B
C
A
A). Attach the
Front Upright (#05)
to the
Main Frame (#04)
and secure by using two
Hex Bolts (#36)
through two
Washers
(#43)
and then two additional
Washers (#43)
and two
Nylon Nuts (#40).
B). Attach the
Main Frame (#04)
over and onto the
Rear Cross Tube (#03)
by inserting from the back two
Hex Bolts (#35)
through two
Washers (#43)
and from the front an additional two
Washers (#43)
and two
Nylon Nuts (#40).
C). Attach the
Supporting Tube (#07)
to the bottom of
Main Frame (#04)
and back of
Front Upright (#05)
by securing
using two
Hex Bolts (#36)
through two
Washers (#43)
as shown in the diagram below.
55
40
1
2
3
4
55
40
1
2
3
4
STEP3:
Assembly Instructions
BCB 500
