CUSTOMER SERVICE 1-888-707-1880 MAURICE PINCOFFS CANADA
©
2009
17
TROUBLE SHOOTING GUIDE
Problem
Cause
Correction
Monitor does not
display
Batteries weak or dead
Replace batteries
Sending unit not connected
Securely plug sending unit into
extension wire and the back of the
monitor
Sending unit not working
properly
Replace sending unit
No speed or
distance displays on
the monitor
Monitor not working properly
Replace monitor
Tension control cable not
connected
Securely plug tension control cable
into the extension tension control
cable
No tension
Magnetic wheel not working
properly
Replace magnetic wheel
Pulse wire not connected
not connected
Securely plug wires into the back of
the monitor
Hand pulse defective
Replace hand pulse grip or ear clip
Heart rate not
displaying
Monitor not working properly
Replace monitor
Crank bearing defective
Replace crank bearings
Idler pulley defective
Replace idler pulley
Grinding
Mag wheel defective
Replace magnetic wheel
Squealing
V-belt slipping
Adjust v-belt
Maintenance
The safety of this produce can be maintained only if regular periodic checks are made. Most checks
can be performed once a week. However some checks should be made before each workout, and
are indicated as such below.
Checks
l
Be sure batteries are new and electronic connection are clean and tight.
l
Check that seat nuts are secure, check before each workout.
l
Check that pedals are tight, pedals can work loose over time.
l
Check that stabilizer bolts are tight, check before each workout this.
l
Check that handlebar is secure, if not, tighten, check before each workout this.
l
Should a part become defective, replace it immediately. Do not allow use of the equipment until
it has been repaired.
Cleaning
Almost all surfaces are washable. A damp cloth is sufficient to clean most surfaces of this unit.
Be careful not to drip water on the monitor. A mild liquid soap may be added if needed.
PDF created with pdfFactory trial version
www.softwarelabs.com