A fixing tool can be bought at BODY BIKE® International
A/S to ease the mounting of the bottom frame.
1) Arrange the bottom frames parallel on the floor next
to the cycle with the correct mounting distance between
them, see figure 3. On the front bottom frame, the
transport wheels should point forward.
2) Take hold of the front post and seat post and lift the
cycle onto the bottom frames, see figure3. Ensure that
the holes in the frame match the holes in the bottom
frames.
3) Put on the spring lock washer and the cap nut and
tighten by using a 13 mm wrench, see figure 4.
4) Unscrew the rubber feet a little. Place the cycle in the
correct position. Turn them up and down until the cycle
stands properly and it is in level.
UNPACKING
BOTTOM FRAME
1) Open the top of the box.
2) Remove all the unmounted parts.
3) Flatten the box on the floor next to the pallet.
4) Loosen the four screws mounting the first
cycle to the pallet. See figure 2.
5) Lift the cycle off the pallet and place it on
the flattened box to spare your floor from
getting marks.
Remove all four screws
Figure 2
PLEASE NOTE
Do not overtighten the nuts.
Max 12 Nm
!
08