CLEANING
After each workout, wipe the cycle down with
tissue paper.
If the cycle is covered in sweat or dirt, use water
in a spray bottle and if necessary a tissue with
some washing-up liquid.
Remember handlebar and saddle.
To make the cycle look its best, use a cloth with a
little vaseline oil on all parts except the handlebar
and saddle.
Vacuum clean the bike inside when necessary to
prevent dust from gathering on the flywheel. If
dirt has already gathered on the flywheel edge,
use a piece of rough felt to sand it down.
At an annual service check, remove the right side
cover and make sure that the small hole by the
front bottom frame is not blocked and allows
water and sweat to exit the frame, see figure 12.
Also check that the ribs on the poly-v belt and
pulley are clean.
To remove the side cover go to
page 20.
PLEASE NOTE
NEVER use alcohol or chemicals
Figure 12
Small drainage
hole.
Right side
cover has
been removed
!
014