REMOVAL OF SIDE COVERS
The side covers can be removed e.g. if the belt needs to
be changed.
1) Dismount the right pedal arm with an 8mm Allen
wrench. See figure 22. Remove hatch. See figure 17.
2) Loosen all the screws holding the side cover with a 3
and 4 mm Allen wrench and remove them. See figure 23.
3) Dismount the top nut and washer on the bottom frame
on the right side of the cycle both in front and back with a
13 mm wrench. See figure 24.
4) Screw the bolts down in order for the side covers to
slide past them. See figure 24.
5) Remove the side cover.
Figure 22
Figure 23
Figure 24
020
