Bodum Bibo Bar, User Manual

Page: 8 / 16

8 User’s manUal
Energy saving
Sleep mode
To save energy your BIBO Bar will go to sleep (into a low power state) after 4 hours of non-use. The indicator light on
the front of the BIBO Bar will turn purple. When sleeping the cold water temperature will gradually rise to 10°C and the
hot water temperature will gradually drop to 75°C. Simply touch any key to wake it up again. The hot and cold water will
reach their optimum temperatures again after approximately 5 minutes and 15 minutes respectively.
BIBO Bar information & maintenance
Replacing the MAXI filter cartridge
To ensure the water from your BIBO Bar continues to taste good the MAXI filter cartridge should be replaced every 6
months. Don’t worry, we will remind you when the filter is due to be changed.
How to replace the MAXI filter cartridge
Remove the lid from the top of the BIBO Bar by lifting it from the back first.
To relieve the water pressure in the filter cartridge turn off the water supply to the BIBO Bar by twisting the blue tap at
the back of the BIBO Bar so that the lever is at right angles to the white water pipe. Dispense at least 500ml of cold water.
You will see the white top of the filter cartridge on the right hand side near to the front. It has a handle protruding from
the top. Turn the handle firmly anti-clockwise then pull the cartridge upwards and out.
Remove the new MAXI filter cartridge from its packaging and insert it. Turn it firmly clockwise to install it.
Turn the water supply to the BIBO Bar back on by twisting the blue tap at the back of the BIBO Bar so that the lever is in
line with the white water pipe.