10
User’s manUal
Cleaning your BIBO
Clean your BIBO Bar by simply wiping it down with a damp cloth. Soap or any other gentle detergent can also be used if
you wish. The drip tray can be removed and cleaned in your dishwasher.
Please don’t use harsh detergents, concentrated washing up liquid or solvents to clean your BIBO. Avoid using anything
abrasive (such as steel brushes, scourers etc.) to clean the body as it will scratch.
It’s very important that you don’t wet the back of the machine whilst cleaning – remember it is
connected to an electrical supply.
Safety notes
•
This BIBO Bar is for indoor use only. Avoid placing it in direct sunlight or next to flammable materials. Avoid placing the
BIBO Bar near other appliances that could get damaged if wet. Do not immerse the BIBO Bar in water.
•
The BIBO Bar uses 230VAC voltage and should be used with a 13 amp fuse in the plug top.
• Important: when using a new or freshly cleaned BIBO for the first time, it’s important that water is
flowing when both the hot and cold water keys are touched, before you switch on the hot water tank.
•
The BIBO Bar dispenses safe and great-tasting drinking water. The tanks are not pressurized and the hot tank is directly
connected to the hot water outlet. No valves are used so it is normal therefore for a small amount of excess water to
be released once water has been dispensed.
•
The BIBO Bar can produce high temperature hot water. As with any kettle, pan or appliance capable of producing hot
water please use caution when dispensing hot water.
•
When your BIBO Bar is turned on for the first time, or after a period of not being used, please run at least 2 litres of
water through both the hot and cold outlets before drinking any, to ensure the water is fresh.
•
Warning: The BIBO Bar must be used with a reliable earth in the mains power supply socket.
•
Warning: Always ensure the drip tray is fitted securely before filling a cup placed on it.
For further notes or detailed explanations on the operation of the machine, please contact BIBO via email at
Installation
Overview
•
Install the BIBO Bar in a cool, dry place where it is well ventilated. It must be kept away from any heat source.
•
Keep the rear of the BIBO Bar a minimum of 5cm (2”) away from the wall and ensure that this part of the dispenser is
well ventilated.
Summary of Contents for Bibo Bar
Page 1: ...User s manual...
Page 15: ...bibo brighter water 15...
Page 16: ...www bibowater co uk Call us free on 0800 678 5969...