28
7. What to do if… ? Check.
What to do if… ?
Check that…
There is no synchronisation
after installation.
1) The signal type emitted by the source clock is the same type as
the clock.
2) The NTP server is on the same network as the receiving clock
(IP addresses, subnet mask and gateways).
3) The Wi-Fi is connected.
The receiver is not at the
right time
1) The time zone selected on the web server is correct.
2) The time server is synchronised.
3) The hands are positioned correctly (shunt at start).
There is no DHCP server on
the network.
1) The default network configuration on the clock is as follows:
- IP: address range from 169.254.0.1 to 169.254.255.254
– MASK: 255.255.0.0
– GATEWAY: 0.0.0.0
– DNS: 0.0.0.0
Loss of Wi-Fi connection
1) The Wi-Fi settings have not changed (SSID, passphrase... for
this, contact the network administrator)
2) Restart the clock.
EN
