Bodart & Gonay Optifire OPTI700, Instructions For Use And Maintenance Manual

Page: 12 / 40

12 Opti-
CAUTION!
- Do not clean the glass when it is hot.
- Spray the product* on the centre of the glass, then spread it using a cloth or absorbent paper.
- Do not use water and/or cleaning products on the painted areas.
- For stubborn marks, it is possible to use a blade for scraping ceramic hobs.
- Cleaning the glass is easier if done regularly.
*We recommend use of the cleaning product “BG Clean” , available from your dealer. “BG Clean” does not
contain caustic soda and is biodegradable.
ASHTRAY DOOR
Check the condition of the seal and if necessary replace it to ensure air tightness. Degradation of this seal
leads to poor fi re control and reduction in yield. Check the operation of the spring clips.
AIR DISTRIBUTORS
Where necessary, unblock the air inlet holes of the front distributor with a vacuum cleaner, as well as
those situated on both sides of the grill, which can easily be removed to facilitate the operation.
GRILLS
Make sure that there are no obstacles restricting their movement.
DUST FILTERS (if there are any, they are level with the air inlets)
Clean them with a vacuum cleaner and, where necessary, with water. New fi lters can be obtained form
your supplier.
THERMOSTAT
Check that it turns properly.
Your supplier is authorised to check the setting.
DOOR
Check that the stainless steel seal is airtight.
If necessary, your supplier can adjust and/or replace it. Check that both the lock and the opening safety
work properly. This is in order to ensure good yield and clean glass.
2. Maintenance:
2.1. Everyday maintenance
GLASS
To clean the glass, open the door using the following procedure: