20
Cosmos - Helios - Solaris
7 MAINTENANCE
Never clean the glass when it is hot! Wait for it to cool down.
Dusting: do not use an aggressive product or liquid; a dry cloth is recommended.
Soiled areas can be restored using SPECIAL HIGH TEMPERATURE (Bodart&Gonay) spray paints
available from your supplier.
For cleaning the glass, do not use an aggressive product. We recommend the “BG CLEAN”
product, available from your supplier.
ANNUAL MAINTENANCE
The appliance and exhaust fl ue must be checked and cleaned every year by your approved
installer!
.
Turn
off the gas supply stopcock.
. Open the door (take this opportunity to clean it).
. Remove the gravel.
. Remove the dust deposits from inside the heating unit and from the burner using a
vacuum cleaner or brush.
. Check that the connections are airtight and that the diff erent parts of the appliance
operate smoothly.
8
USING THE APPLIANCE AND REMOTE CONTROL
The fi replace is operated by remote control and by manual control both for starting and
stopping.
LIGHTING THE PILOT LIGHT: “Cosmos Me1.1” diagram
To light the pilot light, the remote control must be in OFF mode. Press the right (POWER) button
once, ON mode fl ashes, then validate the operation by pressing the left (SET) button, and ON
mode remains on the display.
Sparking continues for 10 seconds after the lighting procedure has started.
Before changing the fl ame level, wait 5 seconds for the pilot light to stabilize and visually check
the presence of the fl ame.
LIGHTING THE BURNER: “Cosmos Me1.1” diagram
When the pilot light has stabilized, press the (HIGH/HAUT) button to increase the gas fl ow and
the (LOW/BAS) button to reduce fl ow.
There are 3 gas levels.
It is recommended that the fl ame level be at maximum in order to light the burner.
After three unsuccessful attemps to light,
the appliance automatically blocks itselfs for 5 minutes.
