Getting
started
28
Getting started
Switching on and off
The mains switch on the rear side of the receiver must be in
position „ON“.
Press the “ “ key of the receiver ort he remote control to change
between standby and operation mode.
In the operation mode, the green channel-location indicator of the
receiver is lit. Additionally, the red LED is lit.
Remote control
Two Micro type batteries are required for the remote control:
LR 03/AAA/1.5 V (included in the scope of supply)
Open the battery compartment.
Insert two batteries according to polarities mentioned on the
battery compartment. Push the cover of the battery compartment
carefully until the cover is locked.
Replace discharging batteries on time.
Always replace both batteries simultaneously and use batteries of
the same type.
If one battery has leaked, wear protective gloves and clean the
battery compartment with a dry cloth.
Summary of Contents for SL 65
