Boca SL 65, Operating Manual

Page: 39 / 58

Entering basic settings
39
Automatic scan
With the automatic scan, the whole frequency range of the receiver
will be scanned for new channels. It may take more than 15 minutes
until the scan is complete.
Select “Automatic scan” with the “P–“ and ”P+“ keys.
Confirm your selection by pressing “OK”.
Follow all further indications displayed on the screen.
Press the "F1“ key if you wish to abort the scan.
Extended scan
With the extended scan, only certain channels and frequency ranges
of the receiver are scanned for new channels. You will have to enter
the start and end channel and the scan mode.
Select “Extended scan” with the “P–“ and ”P+“ keys.
Confirm your selection by pressing “OK”.
Select the channel or frequency range with the “V–“ or “V+“ key.
Press the “P–“ key to go to the next setting
Enter the start frequency with the numerical keys.
After each entry, the cursor moves forward within the input field.
Press the “P–“ key to go to the next setting
Enter the end frequency with the numerical keys.
Press the “P–“ key to go to the next setting
Select the scan mode with the “P–“ and ”P+“ keys.
Confirm your selection by pressing “OK”.
Follow all further indications displayed on the screen.
Press the red multi-functional key "F1“ if you wish to abort the
scan.