Boca Systems PRO/6, Installation Manual

Page: 75 / 84

75
Command Description
#M2 Synchronous V.25bis (HDLC framing)
#M3 Synchronous V.25bis (Character framing - BSC mode)
#N0
n
NRZ character encoding (V.25bis sync only)
#N1 NRZI character encoding (V.25bis sync only)
#O0
n
Characters ignored if modem buffers overflow
#O1 Disconnects if terminal buffer overflows
#O2 Disconnects if line buffer overflows
#O3 Disconnects if either buffer overflows
#Q V.25bis Terminal Speed (see R command)
#R Remote control mode
#S Enter security menu mode
#U0
n
Use ASCII characters for V.25bis mode
#U1 Use EBCDIC characters for V.25bis mode
#V0 Command and S Register verifier off
#V1
n
Command and S Register verifier on
%C0 Compression disabled
%C1 MNP 5 compression enabled
%C2 V.42bis data compression enabled
%C3
n
V.42bis data compression enabled with fallback to MNP 5
%Dn Set disconnect delay to n seconds (default %D0)
%E0 Disable auto-retrain
%E1
n
Enable auto-retrain
%E2 Automatic Speed Stepping
%F0 Option switches 1 and 2 control V.25bis
%F1
n
Option switch 1 and 2 control DTR and DSR
%H0
n
Use B setting for initial MNP 10 connection speed
%H1 Initial connection is made at 1200 bps (MNP 10)
%H2 Initial connection is made at 4800 bps (MNP 10)
%H3 Initial connection is made at 9600 bps (MNP 10)
%H9 Use B setting for connection but do not upshift (MNP 10)
%K0
n
CTS operates normally
%K1 CTS off during dial and handshake
%L0 Report current received signal level (-dBm)
%Ln Set transmit level (n=11 to 19; -11dBm to -19dBm)
%M0
n
Mode LEDs indicate connection speed
%M1 Mode LEDs indicate line quality, V.42/MNP errors & flow
control
%N0
n
Standard Baud Rates
%N1 Standard to 14400 then 20800, 31200, 41600 and 62400
%N2 Standard to 38400 then 51200
Command Reference