Boca Systems PRO/6, Installation Manual

Page: 73 / 84

73
Command Description
&B4
n
10 or 11 bit character length determined by autobaud
&C0 DCD signal always asserted
&C1
n
DCD signal responds to remote modem
&C2 DCD signal always on, pulses low on disconnect
&C3 DCD asserted during voice session
&D0
n
Ignore DTR
&D1 Return to Local command state if DTR goes low
&D2 Hang up and return to Local command state if DTR goes
low, disable auto-answer until DTR asserted
&D3 Initialize with values in &Y profile if DTR goes low
&F0 Restore factory defaults
&F1 Restore non-error correction factory defaults
&F2 Restore synchronous mode factory defaults
&F. Reset modem (clear security database/Telephone numbers)
&G0
n
No guard tone generated
&G1 550 Hz guard tone generated
&G2 1800 Hz guard tone generated
&H0
n
Clocks always present in synchronous mode
&H1 Clocks only appear after connection
&K0 Flow control disabled
&K3 RTS/CTS flow control
&K4 XON/XOFF flow control
&K5 Transparent XON/XOFF flow control
&K9
n
Failsafe flow control
&L0
n
PSTN mode
&L1 Leased-line mode
&L2 Auto leased-line originate mode
&L3 Auto leased-line answer mode
&M0
n
Asynchronous mode
&M1 Synchronous mode with asynchronous dialing
&M2 Synchronous mode with stored number dialing
&M4 Asynchronous mode with stored number dialing
&N0 Abort dial character disabled
&N1
n
Abort dial character enabled
&P0
n
39/61 make/break ratio (USA)
&P1 33/67 make/break ratio (Aus/UK)
&R0
n
CTS follows RTS in Sync mode
&R1 CTS is always on in Sync mode
&S0 DSR signal always asserted
&S1
n
DSR signal asserted at start of handshake
Command Reference