Boca Systems M144PA, Manual

Page: 51 / 64

51
Range: 0-127
Default: 13 (carriage return)
S4 Line Feed Character: (10)
S4 specifies the line feed character. The line feed character is
used for verbose (text) modem result codes.
Range: 0-127
Default: 10 (line feed)
S5 Backspace Character: (8)
S5 specifies the backspace character that is used m delete the
last-entered character. After receiving a backspace character,
the modem sends three characters to the DTE: a backspace character, a
space character and then another backspace character.
Range: 0-32, 127
Default: 8 (BS)
S6 Wait Before Blind Dialing: (2)
S6 specifies the amount of time after the modem goes off-hook before
the modem starts dialing the first telephone number. The modem waits
for at least 2 seconds, even if S6 is set for a value less than 2, before
dialing the first number. S6 is only used for Result Code Type commands
X0, X1, X3 (i.e., Blind Dialing Result Code Types). The ‘W’ (wait for dial
tone) dial modifier causes the modem to ignore the contents of S6.
Result Code Types X2 and X4 enable dial-tone detection, and never use
S6.
Range: 2-255 seconds
Default: 2 seconds