background image

11.0  Warranty information

11.1  Terms of warranty 

The Smootharc machine has a limited warranty that covers manufacturing 
and material defects only. The warranty is affected on the day of 
purchase and does not cover any freight, packaging and insurance costs. 
Verbal promises that do not comply with terms of warranty are not 
binding on warrantor. 

11.2  Limitations on warranty

The following conditions are not covered under terms of warranty: loss or 
damage due to or resulting from natural wear and tear, non-compliance 
with operating and maintenance instructions, connection to incorrect 
or faulty voltage supply (including voltage surges outside equipment 
specs), incorrect gas pressure overloading, transport or storage damage 
or fire or damage due to natural causes (e.g. lightning or flood). This 
warranty does not cover direct or indirect expenses, loss, damage of 
costs including, but not limited to, daily allowances or accommodation 
and travelling costs. 

Modification of the 15A primary input plug or fitment of a lower rated 
primary input plug will render the warranty null and void.

NOTE

Under the terms of warranty, welding torches and their consumables are 
not covered. Direct or indirect damage due to a defective product is not 
covered under the warranty. The warranty is void if changes are made 
to the product without approval of the manufacturer, or if repairs are 
carried out using non-approved spare parts. The warranty is void if a non-
authorised agent carries out repairs. 

 

11.3  Warranty period

The warranty is valid for 18 months from date of purchase provided the 
machine is used within the published specification limits.

11.4  Warranty repairs

A BOC approved service provider must be informed within the warranty 
period of any warranty defect. The customer must provide proof of 
purchase and serial number of the equipment when making a warranty 
claim. Warranty repairs may only be carried out by approved BOC service 
providers. Please contact your local BOC Gas & Gear for a directory of BOC 
approved service providers in your area. 

30

BOC Smootharc TIG 185 AC/DC Operating Manual

Summary of Contents for Smootharc TIG185 AC/DC

































Reviews: