29
Y String Drive
1. Insert the large loose nylon tie into the top of the left hole and align the box end to the
bottom hole of the extruder mount.
2. Insert the large nylon tie with the string attached into the bottom slot on the left side of
the extruder. This nylon tie should be placed entirely through the bottom slot as shown.
3. Move the extruder to the left stop and push the nylon tie connected to the string into
the string holder until the nylon tie is no longer touching the threaded coupler.
4. Wrap the string around the threaded coupler 3 to 4 times close to the bottom of the
threaded coupler.
The string should be higher on the front side of the threaded coupler as shown in
the picture above.
.
