Form
No.
1550-69
r4/20/18 ©
2018
Bobrick
Washroom
Equipment,
Inc. Printed
in
U.S.A.
Page 11
Door
Latch
Keeper
Door CL
Panel CL
Stile
5/16''
(8mm)
Max.
7/8''
(22mm)
1-7/8''
(45mm)
3/4''
(19mm)
28-1/6''
(710mm)
3/16''
(4mm)
1-1/2''
Latch
Keeper &
Door Stop
Door CL
PanelCL
Stile
2-1/2''
2''
1-3/8''
(35mm)
1-7/8''
(50mm)
5/16''
(8mm)
28-1/6''
(715mm)
1-7/8''
(50mm)
Keeper
Latch
INSTALL DOOR HARDWARE
STEP 9
Inswing
A. Mount latch and keepers as shown (Fig. 9f) using
1002500 (#12 x 3/4") screws.
Perpendicular Keeping Stile: Mount latch as shown
(Fig. 9g) using 1002500 (#12 x 3/4") screws for the
latch and keeper. Using keeper as template, place
keepers as shown overhanging edge of stile, to line
up with latch slide. Mark location of mounting holes.
Secure keeper using 1002500 (#12 x 3/4").
NOTE:
To ensure emergency access, locate the
keepers so that the latch slide is no more than 5/16"
(8mm) into the keeper slot as shown. (Fig. 9f).
B. Mount robe hook (Fig. 9h) using 102500 (#12 x 3/4")
screws.
C. Mount inswing door bumper (Fig. 9h) to panel or door
at location that prevents door from hitting panel on the
inswing.
Fig. 9f: Mounting Location of Latch,
Keeper with Emergency Access.
Fig. 9h: Robe Hook and Bumper.
Fig. 9g: Perpendicular Stile Mounting
Location of Latch Keeper.
Fig. 9i: Mounting Location of Latch and
Keeper with Emergency Access.
Outswing
A. Mount latches and keepers as shown (Fig. 9f, 9i) using
screws 1002500 (#12 x 3/4").
NOTE:
To ensure *emergency access, locate the
keeper so the latch slide is seated no more than 5/16"
(7mm) from the top of keeper (See Fig. 9i).
B. On outswing door, install the handle on outside of
door opposite the latch. Using the door handle as a
template on the outside of door, mark location for top
hole in handle 31-5/8" (803mm) up from the bottom
edge of door. Mark location for bottom hole in handle.
Drill two (2) 3/16" (5mm) diameter holes of door
using #8-32 x 1-14" one way screws provided. For
accessible compartments, latch must also be installed
on the interior.
C. Mount robe hook 1002500 (#12 x 3/4") screws.
D. Mount outswing door bumper using 1002500 (#12 x
3/4") at location that prevents door from hitting surface
on the outswing.
