17
OMA64B
To avoid injuries, never fold or
unfold stroller with other individuals
within reach of stroller.
1. Set Parking Brake
Set parking brake. (See stroller
owner’s manual if necessary).
2. Unfasten Restraint Belt
Unfasten buckle, place Restraint Belt
ends to sides of stroller seat.
3. Remove Infant Car Seat
Remove Infant Car Seat from ICSA
and for Duallie strollers remove child
from stroller seat.
4. Empty Stroller
Remove contents from low boy cargo
basket and pockets.
5. Fold Handlebar
Squeeze both handlebar release
levers simultaneously. (See stroller
owner’s manual if necessary).
6. Rotate Handlebar Forward
Slightly rotate handlebar towards
seat and hold in place during next
step.
7. Lift Red Frame Release Handle
Using a short, quick tug, lift red frame
release handle up. Keep tires on
ground as stroller collapses toward
front wheel. (See stroller owner’s
manual if necessary).
NOTE:
We do not recommend
leaving stroller folded with ICSA
installed for long periods of time as
it may leave an imprint in the stroller
seat. For long term folded storage,
remove ICSA.
REMOVE ICSA FROM STROLLER
Remove Infant Car Seat Adapter
and Restraint Belt when not in use.
Do not place children directly in the
stroller seat with the Infant Car Seat
Adapter installed. Remove Infant
Car Seat Adapter from stroller prior
to placing a child directly into the
stroller seat.
Failure to follow these warnings
may result in serious injury or
death.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar. (See stroller
owner’s manual if necessary).
NOTE:
For illustrative purposes,
Chicco compatable ICSA shown.
Other ICSA single remove in same
manner.
For Single Strollers Only
While holding down Red Release
Buttons on both Accessory Adapters
at sides of stroller, pull ICSA forward
and out of Receiver Sockets, keeping
alignment even, left to right, as you pull.
