14
OMA64B
CLICK
NOTE:
For Snug Ride
®
Models only;
Pull Infant Car Seat Release Handle
slightly while pushing down on front
edge of Infant Car Seat (end where
infant’s feet go), then let go of Release
Handle to engage Steel Loops on
Infant Car Seat onto Hooks on ICSA.
5. Verify Infant Car Seat is Securely
Attached
Pull up on Infant Car Seat Carry
Handle to verify Infant Car Seat is
securely attached.
Failure to properly install Infant Car
Seat on Infant Car Seat Adapter
may result in accident, injury or
death.
6. Secure Restraint Belt
Proceed to section titled “Secure
Restraint Belt”.
Failure to properly secure Restraint
Belt may result in accident, injury
or death.
PEG PEREGO
®
INFANT CAR SEAT INSTALLATION
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar, place Restraint Belt
ends to the sides of stroller seat. (See
stroller owner’s manual if necessary).
2. Align Infant Car Seat
Place Infant Car Seat “rear facing”
directly centered on top of ICSA,
align Groove Feature on Infant Car
Seat with Front Tube on ICSA.
3. Verify Infant Car Seat Latched
Properly
Push Infant Car Seat straight down
on ICSA, look and listen for each
respective Latch Feature on bottom
of Infant Car Seat to latch onto Latch
Tube on ICSA.
CLICK
CLICK
4. Verify Infant Car Seat is Securely
Attached
Pull up on Infant Car Seat Carry
Handle to verify Infant Car Seat is
securely attached.
