12
OMA64B
3. Slide Covers Down
Push to slide each Cover (at front
of stroller Accessory Adapter)
down on each side of stroller,
exposing each Receiver Socket.
INSTALL ICSA
1. Align Locking End Caps
Align and insert each Locking End
Cap on ICSA into each respective
Accessory Adapter Receiver Socket.
2. Install ICSA
Push ICSA Locking End Caps
straight into Receiver Sockets fully.
Listen for click or snap noise on each
side.
SINGLE
CLICK
CLICK
DUALLIE
CLICK
CLICK
3. Verify Proper Installation
Pull on center of ICSA Front Tube to
verify ICSA is securely locked into
place.
Failure to attach ICSA securely to
stroller may result in serious injury
or death.
PREPARING TO ATTACH
INFANT CAR SEAT
NOTE:
Follow steps 1-3 in this section
to prepare car seat and stroller for
installation, then proceed to section
for your brand car seat and follow
installation steps in sequence.
When attaching Infant Car Seat to
ICSA for the fi rst time, practice
attaching and removing
unoccupied Infant Car Seat several
times until the function becomes
familiar.
Failure to securely attach Infant Car
Seat may result in accident,
serious injury or death.
