background image

 

SAFETY

 

Careful operation is your best insurance against an accident. Read this section carefully before operating the vehicle 

and accessory. This accessory is capable of amputating hands and feet and throwing objects. Failure to observe the 

following safety instructions could result in serious injury. All operators, no matter how experienced they may be, 

should read this and other manuals related to the vehicle and accessory before operating. It is the owner's legal 

obligation to instruct all operators in safe operation of the accessory.

 

GLOSSARY:

 

 

In this manual, right and left sides are determined by 
sitting on the seat of the vehicle facing forward.

 

 

In this manual, "accessories" means attachments that 
you install on the vehicle.

 

 

TRAINING:

 

 

1.

 

Read this owner's manual carefully. Be thoroughly 
familiar with the controls and proper use of the 
vehicle and accessory. Know how to stop the unit 
and disengage the controls quickly.

 

 

2.

 

Never allow children to operate the vehicle nor the 
accessory. Never allow adults to operate the vehicle 
nor the accessory without proper instructions.

 

 

3.

 

No one should operate the vehicle nor the 

 

accessory while intoxicated or while taking 
medication that impairs the senses or reactions.

 

 

4.

 

Keep the area of operation clear of all people, 
particularly small children and pets.

 

 

 

PREPARATION: 

 

 

1.

 

Thoroughly inspect the area where the accessory 
is to be used and remove door mats, all foreign 
objects and the like.

 

 

2

 

Disengage all clutches and shift into neutral before 
starting engine.

 

 

3.

 

Do not operate the accessory without wearing 
adequate garments. Avoid loose fitting clothing that 
can get caught in moving parts. Wear footwear that 
will improve footing on slippery surfaces.

 

 

4.

 

Never attempt to make any adjustments while the 
engine (motor) is running (except when specifically 
recommended by manufacturer). 

 

 

5.

 

Let the vehicle and accessory adjust to outdoor 
temperatures before using.

 

 

6.

 

Never use an accessory without proper guards, 
plates, or other safety protective devices in place

 

 

7.

 

Always make sure to wear the appropriate safety 
equipment required (glasses, muffs, mask…) for 
each type of product. See operation section.

 

 

8.

 

Always make sure of having safe traction on the 
vehicle by using the recommended accessories 

 

 
 

BAG COLLECTION SYSTEM

 

Summary of Contents for 970474 BOSS-VAC PRO













































Reviews: