background image

 

SAFETY

 

NOTICE !!!!

 

 

Unauthorized modifications may present extreme 
safety hazards to operators and bystanders and 
could also result in product damage.

 

 

Schiller Grounds Care, Inc. strongly warns against, 
rejects and disclaims any modifications, add

-

on 

accessories or product alterations that are not 
designed, developed, tested and approved by 
Schiller Grounds Care, Inc Engineering 
Department. Any Schiller Grounds Care, Inc 
product that is altered, modified or changed in any 
manner not specifically authorized after original 
manufacture

-

including the addition of "after

-

market" accessories by Schiller Grounds Care, 
Inc.

-

will result in the Schiller Grounds Care, Inc. 

Warranty being voided.

 

 

Any and all liability for personal injury and /or 
property damage caused by any unauthorized 
modifications, add

-

on accessories or products not 

approved by Schiller Grounds Care, Inc. will be 
considered the responsibility of the individual(s) or 
company designing and/or making such changes.

 

Schiller Grounds Care, Inc. will vigorously pursue 
full indemnification and costs from any party 
responsible for such unauthorized post

-

manufacture modifications and/or accessories 
should personal injury and/or property damage 
result.

 

 

This symbol means:

 

ATTENTION !

 

BECOME ALERT!

 

Your safety and the safety of others is involved.

 

Signal word definitions:

 

The signal words below are used to identify levels of 
hazard seriousness. These words appear in this 
manual and on the safety labels attached to Schiller 
Grounds Care, Inc. machines. For your safety and 
the safety of others, read and follow the information 
given with these signal words and/or the symbols 
shown above. Regardless of the hazard be 
extremely careful.

 

DANGER 

Indicates an imminently hazardous 

situation which, if not avoided, 

WILL

 result in death 

or serious injury.

 

WARNING 

Indicates a potentially hazardous 

situation which, if not avoided, 

COULD

 result in 

death or serious injury.

 

CAUTION 

Indicates a potentially hazardous 

situation which, if not avoided, 

MAY 

result in minor 

or moderate injury. It may also be used to alert 
against unsafe practices or property damage.

 

CAUTION 

Used without the safety alert symbol 

indicates a potentially hazardous situation which, if 
not avoided, 

MAY 

result in property damage.

 

BAG COLLECTION SYSTEM

 

Summary of Contents for 970474 BOSS-VAC PRO













































Reviews: