3
I.III Explanation of symbols
In this operating manual, important safety information is identified as follows:
Warning – failure to follow the instructions could result in serious injury or death.
Caution – failure to follow the instructions could cause personal injury or damage equipment and/or the surroundings.
This symbol denotes tips and special information.
Shows the correct tool and the proper amount of torque for mounting.
In this case a 2.5mm hex wrench should be used to tighten the screw.
Maximum torque for mounting the screw is 1 Nm (newton meter).
Observe these notices at all times to avoid personal injuries and damage to the product.
I.IV Approved operating conditions / locations
BLOKS. components can be used at temperatures between -10 °C and +60 °C. The IP67 protection rating means that this component is both
protected against harmful dust as well as protected against immersion in water to a depth of up to 1 meter for up to 30 minutes. Please also
observe the information on permissible operating conditions contained in the pedelec manufacturer’s operating instructions. Any limita-
tions regarding permissible operating conditions (e.g. maximum climbing capability, maximum permissible height of obstacles, maximum
load, etc.) must be observed when using the pedelec. Observe the safety and hazard information provided in the individual chapters of the
user's manual.
I.V Technical data
BLOKS. remote 14d
(handlebar control unit)
Remote 14d
Rocker switch for + and -, 3 buttons, 22.2mm inner diameter, hard-wired
Display type
LCD (Liquid Crystal Display)
Color depiction
Monochrome
Display diagonal
1.4 inch / 35.4mm
Dimensions (W x L x H)
22mm x 46mm x 51mm
Display screen
Hard-coated PMMA (PolyMethyl MethAcrylate) acrylic glass lens
Protection rating
IP67
Weight with cable
58 g
1. What is the BLOKS. remote 14d?
The BLOKS. remote 14d is a control unit with an integrated LCD display mounted on the handlebars. Since all important information is
shown on the high-contrast, 1.4-inch monochrome LCD, a larger display mounted in the middle of the handlebars is not necessary – the
remote 14d is a self-contained system.
