2
Display
21 Jun 2017
Page 13 of 28
It is only fully functional if the speed sensor and the cables have been mounted
correctly and the rechargeable battery is adequately charged.
2.7
Operation
2.7.1
Switching on the E-Bike system
Press the LED button on the rechargeable battery.
The display unit activates automatically.
The E-Bike system is now operational.
2.7.2
Switching off the E-Bike system
If the bike is not moved, the display unit and motor switch to standby mode.
However, this can also be activated manually.
If you only want to park your E-Bike briefly, you can switch to the
standby mode
as
follows:
Press
the On/Off
button briefly
The display is switched off.
The rechargeable battery remains in the
Active Mode
for two hours
(see 3.6.2).
As soon as you move the E-Bike again, the display and motor are reactivated and the
E-Bike system is available again. After two hours in the
Active Mode
the
rechargeable battery switches to the
Deep Sleep mode
(see 3.6.2).
There are two ways of completely deactivating the E-Bike system:
Press the On/Off
button longer (> 3 s).
OR
Press the LED
button on the rechargeable battery longer (> 3 s).
The display unit, motor and rechargeable battery will be switched
off completely.
After completely switching off the system, it needs to be started again via the LED
button on the rechargeable battery to reactivate it (see 3.6.1).
Scott E-Bikes can only be switched off via the rechargeable battery.
2.7.3
Change support level
Press rocker
Up
to increase the support level.
Press rocker
Down
to decrease the support level.
2.7.4
Activate pushing aid
Keep the
pushing aid
button pressed (min. 3 s).
To finish, release button.
2.7.5
Switch the lights on and off
Press the
Light
button briefly.
NOTE:
Standby mode
Complete
deactivation
NOTE:
Scott E-Bikes
