3
Rechargeable battery
21 Jun 2017
Page 19 of 28
and unlocking the rechargeable battery from your cycle manufacturer and your
bicycle dealer.
3.5
Commissioning
3.5.1
Check the rechargeable battery before using it for the first
time
The rechargeable battery is partially charged when delivered. Therefore, test the
rechargeable battery before you charge it for the first time or use it with your E-Bike.
Activate the rechargeable battery by pressing the LED button.
The charging status display should now switch from 'empty' to 'full'
and then the current display status is shown for approx. 4
seconds.
If no LED on the charging status display shines or if the
rechargeable battery cannot be activated, it may be possible that
the cell voltage is too low and the rechargeable battery needs to be
charged.
If at least one but not all LEDs of the charging status display shine,
the rechargeable battery should be fully charged before it is used
for the first time.
3.5.2
Charging the rechargeable battery
21
Charging connector
22
Charging connection
Only use the charger supplied with your E-Bike. Only this charger matches your
rechargeable battery.
The rechargeable battery is partially charged when delivered (approx. 30-50 %). To
guarantee the full performance of the rechargeable battery, charge it completely with
the charger before it is used for the first time (see also, chapter 4).
The rechargeable battery can be charged separately or on the E-Bike without
reducing the service life.
Connect the charger to the mains supply.
Figure
9
Charging the
rechargeable battery
(example)
NOTE:
21
22
