BMW Z8 Owner'S Manual Download Page 141

Page: 141 / 175

141

Index

Data

Technology

Repairs

Car care

Controls

Overview

Fuses

Behind the passenger's seat

Move the passenger's seat forward
and open the storage compartment
located behind it.
The list is on the lid's inside cover

Remove the fuse box lid containing
the spare fuses and the plastic twee-
zers

Use the plastic tweezers to remove
the fuse for the accessory or equip-
ment that has stopped working

Replace a blown fuse, recognizable
by its melted metal strip, with a new
fuse that has the same color and
ampere rating.

520de077

Do not attempt to repair a blown
fuse or replace it with a fuse

having a different color or ampere
rating. To do this could cause a fire in
the vehicle resulting from a circuit over-
load.

If the fuse continues to blow, have the
problem corrected by a BMW center.

Online Edition for Part No. 01 41 0 156 878 - © 06/02 BMW AG

Summary of Contents for Z8
















































































































































































Search results

Summary of Contents for Z8

Reviews:

BMW Z8, Owner'S Manual, Page: 141 / 175

Search results

Summary of Contents for Z8

Reviews: