manualshive.com logo in svg

BMW Z8, Owner'S Manual, Page: 105 / 175

Share
Download
BMW Z8 Owner'S Manual Download Page 105

105

n

Index

Data

Technology

Repairs

Car care

Controls

Overview

To release 

Pull the lever located under the left-
hand side of the instrument panel.

520de084

Never attempt to carry out service 
or repair operations on your 

vehicle if you do not have the required 
professional skills and technical back-
ground. Always switch off the engine 
and allow it to cool down before 
working in the engine compartment. 
Always disconnect the battery before 
working on any electrical systems or 
equipment, especially when these are 
located within the engine compartment. 
Comply with all applicable instructions 
and safety precautions. Failure to work 
in an informed, professional manner 
when servicing components and mate-
rials constitutes a safety hazard for 
vehicle occupants and other road 
users. If you are not familiar with official 
servicing procedures, please have the 
work performed by your BMW center.

<

To open

Press the release handle upward and 
open the hood.

520de153

Hood

Online Edition for Part No. 01 41 0 156 878 - © 06/02 BMW AG  

Summary of Contents for Z8
















































































































































































Reviews:

No comments