BMW Z3 COUPE, Manual

Page: 24 / 198

24 n
Indicator and warning lamps
Yellow: Check as soon as
possible
Antilock Brake System (ABS)
●
Comes on during normal vehicle
operation: ABS has been deac-
tivated in response to system malfunc-
tion. Conventional braking efficiency
is available without limitations. Please
have the system inspected by your
BMW center. For additional information:
Refer to page
101 .
Antilock Brake System warning
lamp for Canadian models.
Engine oil level
*
Comes on after the engine has
been shut off: Check the engine
oil level. For additional information:
Refer to page
125 .
Automatic transmission
*
Because of a malfunction, the
automatic transmission shifts
only in the emergency program. Please
consult the nearest BMW center.
For additional information: Refer to
page
64 .
Brake pads
●
Have the brake pads checked.
For additional information:
Refer to page 104 .
Automatic Stability Control plus
Traction (ASC+T)/Dynamic Sta-
bility Control (DSC)
*
●
ASC+T/DSC has been switched off or
has been deactivated because of a mal-
function. In the event of a malfunction,
have the system checked as soon as
possible by your BMW center.
For additional information: Refer to
page
76 .
Service Engine Soon
●
If the indicator lamp comes on
either continuously or intermit-
tently, this indicates a fault in the emis-
sions-related electronic systems. Al-
though the vehicle remains operational,
you should have the systems checked
by your BMW center at the earliest pos-
sible opportunity.
For additional information: Refer to
page
142 .
"Service Engine Soon" warning
lamp for Canadian models.
Electronic Engine Power Control
(EML)
* ●
Malfunction in the EML
*
.
During braking, greater pedal pressure
may be required and pedal travel may be
increased. Please have the system in-
spected by your BMW center.