BMW Z3 COUPE, Manual

Page: 130 / 198

130 n
Brake fluid Vehicle Identification
If the warning lamp for the brake
hydraulic system comes on:
Check the brake fluid level. Add brake
fluid to the upper mark ("MAX") if nec-
essary. For this, refer also to the in-
structions on page
104 .
To eliminate the cause of the brake fluid
loss, please consult a BMW center. You
can also receive information concerning
approved brake fluids (DOT 4) there.
Brake fluid loss may result in extended
brake pedal travel. If this occurs, refer
to the notes on page
104 .
365de075
Brake fluid is hygroscopic, that is,
it absorbs moisture from the air
over time.
In order to ensure the operating safety
and reliability of the brake system, have
the brake fluid changed every two years
by an BMW center. Refer also to the
Service and Warranty Information
Booklet (US models) or the Warranty
and Service Guide (Canadian models).
Brake fluid is toxic and will damage the
vehicle's paint. You should always store
it in its original container and in a loca-
tion which is inaccessible to children.
Avoid brake fluid spills. Do not fill brake
fluid beyond the "MAX" level in the res-
ervoir. The brake fluid could ignite upon
contact with hot engine parts and
cause serious burns.
<
Comply with the applicable envi-
ronmental laws regulating the dis-
posal of brake fluid.
<
The Vehicle Identification Number is lo-
cated in the engine compartment below
the windshield and on the top of the in-
strument panel.
367us053