BMW Z3 COUPE, Manual

Page: 155 / 198

155 n
Index
Data
Te
chnolog
y
Repairs
Car care
Controls
Overview
Tire change – Z3 roadster, Z3 coupe
Safety measures in the event of a
breakdown or flat tire:
Stop the vehicle on a firm, level surface
as far as possible from the flow of
traffic. Turn on the hazard warning
flashers.
Turn the steering wheel to the straight-
ahead position, remove the key and en-
gage the steering lock. Shift into 1st or
reverse (selector lever in "Park" with
automatic transmission) and engage
the parking brake.
All passengers should be outside the
car and well away from your immediate
working area (for instance, behind the
guardrail).
If a warning triangle or portable hazard
warning lamp is available, set it up on
the roadside at an appropriate distance
from the rear of the vehicle. Comply
with all safety guidelines and regula-
tions.
Change the wheel only on a level, firm
surface which is not slippery. Avoid
jacking the car on a soft or slippery
support surface (snow, ice, tiles, loose
gravel, etc.), since it could slide side-
ways.
Place the jack on a firm support sur-
face.
Do not place wooden blocks or similar
objects under the jack. If this done, the
jack might not be able to reach its full
support capacity because of the limited
height.
Do not lie under the vehicle or start the
engine when the vehicle is supported
by the jack. This creates the risk of fatal
injury.
<
What you will need
The illustration depicts an example of
the onboard tool kit of the Z3 coupe.
Other than the warning triangle, the
same tools are arranged somewhat dif-
ferently in the storage compartment of
the Z3 roadster.
In order to avoid rattling noises later,
note the position of the tools when you
remove them and return them to their
original position when you are through
using them.
>
Car jack
Release the Velcro® fastener in the
luggage compartment under the floor
mat.
After use, wind down the jack com-
pletely.
367de685
Z3 coupe