BMW SA640, Installation Instruction, Page: 3 / 33

1-2/EN
Specialist knowledge required.
1 Important information
(Only for use within the BMW dealer organisation).
Installation time approx. 4-6 hours.
The installation times may vary depending on the condition of the car and the equipment in it.
These installation instructions are only for cars without SA 640 (telephone preparation).
Target group
The target group for these installation instructions is staff who have been trained on BMW cars.
Work
All servicing, repair, installation and adjustment work on cars is completed at your own risk.
All work is to be completed using the latest BMW
–
Repair instructions,
–
Circuit diagrams,
–
Service manuals,
–
Work instructions,
–
Diagnostics manuals
in a rational sequence using the prescribed tools (special tools) and pursuant to the relevant health and safety
regulations.
Safety notes
Please read the following before starting the installation work:
If the specified PIN slots are already in use, bridges, double crimps or parallel end stops are to be used.
All work is shown for a left-hand drive model. On right-hand drive models the work must be completed
the opposite way round.
The installation kit does not contain any colour-dependent parts.
The MID with telephone key is not required for the function of the telephone and should only be fitted with
the consent of the customer (additional cost).
All wiring harnesses are to be laid such that they cannot be kinked, chafed or crushed.