BMW S 1000XR 2018 Rider'S Manual Download Page 62

Page: 62 / 241

The motorcycle decelerates
steplessly.
If button

is no longer

pressed, the speed reached is
maintained and saved.

Deactivating cruise-
control system

Actuate brakes, clutch or throt-
tle grip (take back throttle be-
yond back position) to deacti-
vate cruise-control system.

NOTICE

With ASC and DTC interventions,
the cruise-control system is au-
tomatically deactivated for safety
reasons.

with Gearshift Assistant Pro

Switch for deactivating cruise-
control system.

NOTICE

When changing gear using the
Pro Gear-shift Assistance func-

tion, the cruise-control system
is automatically deactivated for
safety reasons.

Cruise-control system indicator
light goes out.

Resuming former cruising
speed

Briefly push button

back to

return to the speed saved be-
forehand.

NOTICE

Opening the throttle does not
deactivate the cruise-control sys-
tem. If you release the throttle

grip, the motorcycle will decel-
erate only to the cruising speed
saved in memory, even though
you might have intended slowing
to a lower speed.

Cruise-control system indi-
cator light lights up.

Switch off cruise-control
system

Push switch

to the left.

The system is deactivated.
Button

is locked.

Operation

Summary of Contents for S 1000XR 2018


















































































































































































































































Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands

BMW S 1000XR 2018, Rider'S Manual

Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands