BMW S 1000XR 2018 Rider'S Manual Download Page 174

Page: 174 / 241

Mount Topcase

with topcase 2, large, 49 l

with luggage rack

WARNING

Topcase not properly se-
cured

Driving safety is impaired

Topcase must not shake and
must be fastened clearance-
free.

Pull handle

up as far as it will

go.

Hook the topcase into the lug-
gage rack

. Make sure that

the hooks

fit securely into

the corresponding mount-
ings

Press handle down until it en-
gages.

Turn key in Topcase lock into
Position

and remove.

Top speed for riding with
topcase 2 large, 50 l

max 112 mph (max 180 km/h)

Payload of topcase
2 large, 50 l

max 11 lbs (max 5 kg)

Do not exceed values for maxi-
mum speed and payload.

172

Accessories

Summary of Contents for S 1000XR 2018


















































































































































































































































Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands

BMW S 1000XR 2018, Rider'S Manual

Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands