BMW S 1000XR 2018 Rider'S Manual Download Page 56

Page: 56 / 241

The ASC/DTC setting remains
unchanged.

ABS indicator light lights
up.

Release button

within two

seconds.

ABS indicator light contin-
ues to be lit up.

ABS is deactivated.
with ABS Pro

ABS Pro is deactivated.

Activating ABS

Press and hold the

button

until first the ASC/DTC indica-

tor light

and then the ABS

indicator and warning light

change their display behavior.
The ASC/DTC setting remains
unchanged.

ABS indicator light goes
out, and starts to flash if

self-diagnosis has not been com-
pleted.

Automatic Stability
Control (ASC)

Deactivating ASC

Switch on the ignition.

NOTICE

The ASC function can also be
deactivated while riding.

Press and hold the

button

until the ASC -indicator and
warning light

changes its

display behavior.
The ABS setting remains un-
changed.

ASC indicator and warning
light starts to light up.

Release button

within two

seconds.

ASC indicator and warning
light continues to be lit up.

ASC is deactivated.

Operation

Summary of Contents for S 1000XR 2018


















































































































































































































































Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands

BMW S 1000XR 2018, Rider'S Manual

Search results

Summary of Contents for S 1000XR 2018

Reviews:

Related manuals for S 1000XR 2018

Brands by name

Popular brands