BMW S 1000 RR - 2010, Rider'S Manual

Page: 90 / 178

In a gravel bed
with BMW Motorrad Race ABS
and DTC
OE
DTC shut-off
On very loose substrates (e.g. a
gravel bed on a racetrack), the
control interventions of the DTC
can attenuate the drive force
on the rear wheel until the rear
wheel no longer turns. In this
case, BMW Motorrad recom-
mends switching off the DTC
temporarily.
Note that the rear wheel will spin
in the loose substrate, and close
the throttle in a timely manner
before reaching a solid substrate.
Then, switch the DTC back on.
Removing and installing
mirror
Removing mirror
Make sure ground is level and
firm and park motorcycle.
Remove nuts 1 on left and
right and take off mirror.
Secure the paneling 2 on the
left and right to the fairing
bracket
3 . If cable ties are
used, protect possible locations
of abrasion marks using an
adhesive strip.
Installing mirrors
Make sure ground is level and
firm and park motorcycle.
Remove fairing fastener.
6
88
z On the racetrack