BMW S 1000 RR - 2010 Page 131 Rider'S Manual Download

Page: 131 / 178

Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.

The bulb is pressurized and
can cause injury if dam-

aged.
Wear eye and hand protection
when replacing bulbs.

An overview of the bulb
types installed in your mo-

torcycle is provided in the chap-
ter "Technical Data".

Replacing low-beam and
high-beam bulbs

The alignment of the con-
nector may differ from the

illustration depending on the bulb
to be replaced.

Make sure ground is level and
firm and park motorcycle.
Switch off ignition.

Remove the cover

to replace

the low-beam bulb.

Remove the cover

to replace

the high-beam bulb.

Disconnect plug

Remove spring wire brackets

from their detents on left and
right and fold them up.
Remove bulb

from the

socket.

129

Maintenance

Summary of Contents for S 1000 RR - 2010



















































































































































































Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Related manuals for S 1000 RR - 2010

Brands by name

Popular brands

BMW S 1000 RR - 2010, Rider'S Manual

Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Related manuals for S 1000 RR - 2010

Brands by name

Popular brands