BMW S 1000 RR - 2010 Page 137 Rider'S Manual Download

Page: 137 / 178

Diode rear light

If more LEDs have burned out in
the tail light than are indicated in
the Technical Data below, the tail
light bulb must be replaced. In
this case:

Contact a specialized work-
shop, preferably an authorized
BMW Motorrad retailer.

Maximum number of de-
fective LEDs in taillight

Replacing license plate
light

Pull license-plate light

out of

lamp housing.

Pull bulb out of socket.

Replace defective bulb.

Do not touch the glass of
new bulbs with your fin-

gers. For installation, use a clean,
dry cloth. Dirt deposits, in par-
ticular oil and grease, interfere
with heat radiation from the bulb.
Overheating and therefore short
service life of the bulbs are the
consequence.

Bulb for license-plate
light

W5W / 12 V / 5 W

Press bulb into socket.

135

Maintenance

Summary of Contents for S 1000 RR - 2010



















































































































































































Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Related manuals for S 1000 RR - 2010

Brands by name

Popular brands

BMW S 1000 RR - 2010, Rider'S Manual

Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Related manuals for S 1000 RR - 2010

Brands by name

Popular brands