BMW S 1000 RR - 2010 Rider'S Manual Download

Page: 69 / 178

Press fuel tank cap down firmly
to close.
Remove key and close protec-
tive cap.

Securing motorcycle
for transport

Protect all components along
which straps are routed against
scratching. For example, use
adhesive tape or soft cloths.

Remove screws

and take off

trim panel of lower fork bridge.

The motorcycle can tip
away to the side and fall

over.
Secure the motorcycle against
tipping away to the side.

Push motorcycle onto transport
surface, and do not place on
side stand or center stand.

Components can be dam-
aged.

Do not pinch components, e.g.
brake lines or wiring harnesses.

Lay straps at front over lower
fork bridge on both sides.
Tension straps downward.

Riding

Summary of Contents for S 1000 RR - 2010



















































































































































































Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Related manuals for S 1000 RR - 2010

Brands by name

Popular brands

BMW S 1000 RR - 2010, Rider'S Manual

Search results

Summary of Contents for S 1000 RR - 2010

Reviews:

Related manuals for S 1000 RR - 2010

Brands by name

Popular brands