BMW R nineT 2020 Page 99 Rider'S Manual Download

Page: 99 / 221

The "usable fuel capacity"

specified in the technical

data is the quantity that the

fuel tank could hold if refilled

after it had been run dry and

the engine had cut out due to a

lack of fuel.

Usable fuel capacity

approx. 18 l

Reserve fuel

approx. 3.5 l

Press the fuel filler cap down

firmly to close.

Remove the key and close the

protective cap.

SECURING MOTORCYCLE

FOR TRANSPORTATION

Make sure that all compon-

ents that might come into

contact with straps used to

secure the motorcycle are ad-

equately protected against

scratching. Use adhesive tape

or soft cloths, for example, for

this purpose.

ATTENTION

Vehicle topples to side when

being lifted on to stand

Risk of damage to parts if

vehicle topples

Secure the vehicle to pre-

vent it toppling, preferably

with the assistance of a

second person.

Push the motorcycle onto the

transportation flat and hold it

in position: do not place it on

the side stand.

Summary of Contents for R nineT 2020






























































































































































































































Search results

Summary of Contents for R nineT 2020

Reviews:

Related manuals for R nineT 2020

Brands by name

Popular brands

BMW R nineT 2020, Rider'S Manual

Search results

Summary of Contents for R nineT 2020

Reviews:

Related manuals for R nineT 2020

Brands by name

Popular brands