BMW R nineT 2020 Page 122 Rider'S Manual Download

Page: 122 / 221

116

MAINTENANCE

Brake-pad wear limit,

rear

1.0 mm (friction pad only,

without backing plate. Make

sure that the brake disc is not

visible through the bore in

the inboard brake block.)

If the brake disc is visible:

WARNING

Brake-pad thickness less

than permissible minimum

Diminished braking effect,

damage to the brakes

In order to ensure the de-

pendability of the brake

system, do not permit the

brake pads to wear past the

minimum permissible thick-

ness.

Have the brake pads replaced

by a specialist workshop,

preferably an authorised

BMW Motorrad retailer.

Brake pad wear

The rear wheel brake has a

brake-pad wear indicator.

Shaft

with three marker

rings

is between the brake

pads.

How to interpret the marks:

3 rings visible: brake-pad

thickness is at least 75 %

2 rings visible: brake pad

thickness is at least 50 %

1 ring visible: brake pad

thickness is at least 25 %

No ring visible: wear limit has

been reached, check as de-

scribed above

Summary of Contents for R nineT 2020






























































































































































































































Search results

Summary of Contents for R nineT 2020

Reviews:

Related manuals for R nineT 2020

Brands by name

Popular brands

BMW R nineT 2020, Rider'S Manual

Search results

Summary of Contents for R nineT 2020

Reviews:

Related manuals for R nineT 2020

Brands by name

Popular brands