torcycle's components are not
designed to withstand. Damage
caused in this way is not covered
by the warranty.
Do not tamper with the engine
control unit.
Checklist
Use the following checklist to
check important functions, set-
tings and wear limits before you
ride off.
Brakes
Front and rear brake fluid levels
Clutch
Clutch fluid level
Shock absorber setting and
spring preload
Tread depth and tire pressure
Firm seating of cases and lug-
gage
At regular intervals:
Engine oil level (every time you
refuel)
Brake pad wear (during every
third stop for refueling)
Starting
Side stand
You cannot start the motorcy-
cle with the side stand extended
and a gear engaged. The engine
will switch itself off if you start it
with the transmission in neutral
and then engage a gear before
retracting the side stand.
Transmission
You can start the engine when
the transmission is in neutral or if
you pull the clutch with a gear
engaged. Do not engage the
clutch until after switching on the
ignition, as otherwise the engine
cannot be started.
Starting engine
Emergency ON/OFF switch in
run position
A
.
Switch on ignition.
Pre-ride check is performed.
(
67)
with OE BMW Motorrad Integral
ABS:
Switch on ignition.
Pre-ride check is performed.
(
67)
ABS self-diagnosis is
performed. (
68)
5
66
z
Riding
Summary of Contents for R 1200 R 2007
