BMW R 1200 R 2007 Rider'S Manual Download

Page: 55 / 160

Heating function off.

50 % heat output (one dot
visible).

100 % heat output (three
dots visible).

Automatic Stability
Control ASC

Switching off ASC
function

Switch on ignition.

The ASC function can al-
so be deactivated while

driving.

Press and hold ASC button

ASC warning light begins to
light up.

Release ASC button within
three seconds.

ASC warning lamp contin-
ues to light up.

ASC function is deactivated.

Activating ASC function

Press and hold ASC button

ASC warning light goes out;
if self-diagnosis is not com-

pleted, the ASC warning light
begins to flash.

Release ASC button within
three seconds.

ASC warning light remains
off or continues to flash.

ASC function is activated.
As an alternative to pressing
ASC button, ignition can also
be switched off and then on
again.

Operation

Summary of Contents for R 1200 R 2007

































































































































































Search results

Summary of Contents for R 1200 R 2007

Reviews:

Related manuals for R 1200 R 2007

Brands by name

Popular brands

BMW R 1200 R 2007, Rider'S Manual

Search results

Summary of Contents for R 1200 R 2007

Reviews:

Related manuals for R 1200 R 2007

Brands by name

Popular brands