BMW R 1200 R 2007, Rider'S Manual

Page: 108 / 160

Align clamp 1 with marking A
on marking on muffler and
tighten screw to specified
torque.
Clamp on muffler and
manifold
41 lb/ft (55 Nm)
If the gap between the rear
wheel and the muffler is too
small, the rear wheel can over-
heat.
The gap between the rear wheel
and the muffler must be at least
15 mm.
Tighten screw 2 for bracket of
muffler on passenger footrest
with appropriate torque.
Muffler on footrest sys-
tem
14 lb/ft (19 Nm)
Remove auxiliary stand if nec-
essary.
Front wheel stand
Use
A front-wheel stand for simple,
safe changing of the front wheel
is available from BMW Motor-
rad. This front wheel stand is
available at your authorized BMW
Motorrad retailer.
The BMW Motorrad front
wheel stand is not designed
for holding motorcycles without a
center or other auxiliary stands. A
motorcycle standing on the front
wheel stand and the rear wheel
alone can fall over.
Place the motorcycle on the cen-
ter stand or an auxiliary stand
before lifting it with the BMW
Motorrad front wheel stand.
Mounting front wheel
stand
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
8
106
z Maintenance