BMW R 1200 GS -, Rider'S Manual

Page: 77 / 229

an authorised BMW Motorrad
dealer.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The DWA LED then indicates
the reason for the alarm for one
minute.
Light signals issued by the
DWA LED:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorised vehicle
key
Flashes 4x: Disconnection of
the anti-theft alarm from the
motorcycle's battery
Flashes 5x: Motion sensor 3
Deactivation
Kill switch in operating position
(run).
Switch on the ignition.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Customising anti-theft
alarm settings
Switching on ignition ( 46).
Repeatedly press button 1
briefly until the top display line
displays
2
SETUP ENTER
.
Press and hold button 1 to
start the
SETUP
menu.
Press button 1 briefly to go to
the next menu item
DWA
.
In the top display line 2 ,
DWA
is indicated.
The bottom display line
3
shows the preset value.
Press button
4 briefly in order
to change the set value.
The following settings are avail-
able:
On
: The alarm system has
been activated or will be ac-
tivated automatically when the
ignition is switched.
Off
: Alarm system is deactiv-
ated.
4
75
z Operation