BMW R 1200 GS - Page 165 Rider'S Manual Download

Page: 165 / 229

Turn the key in the topcase
lock to position

and remove

the key from the lock.

Maximum speed
for riding with

topcase 2 large, 49 l

max 180 km/h

Payload of top-
case 2 large, 49 l

max 5 kg

Do not exceed the values for
maximum speed and payload.

Opening topcase

topcase 2 large, 49 l

Turn the key in the topcase
lock to position

Push lock barrel

forward.

Lever

pops up.

Pull the release lever all the
way up.
The lid of the topcase opens.

Closing topcase

topcase 2 large, 49 l

Pull release lever

all the way

up.
Close the lid of the topcase
and hold it down. Check that
nothing is trapped between the
lid and the case.

163

Accessories

Summary of Contents for R 1200 GS -






































































































































































































































Search results

Summary of Contents for R 1200 GS -

Reviews:

Related manuals for R 1200 GS -

Brands by name

Popular brands

BMW R 1200 GS -, Rider'S Manual

Search results

Summary of Contents for R 1200 GS -

Reviews:

Related manuals for R 1200 GS -

Brands by name

Popular brands