BMW R 1200 GS -, Rider'S Manual

Page: 39 / 229

Possible cause:
The rider has switched off the
ABS system.
Activate the ABS function.
ASC intervention
The ASC telltale and warn-
ing light flashes quickly.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than the ASC inter-
vention lasts. This affords the
rider visual feedback on control
intervention even after the critical
situation has been dealt with.
ASC self-diagnosis not
completed
The ASC telltale and warn-
ing light flashes slowly.
Possible cause:
ASC self-diagnosis not
completed
The ASC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. The ASC
warning light must go out
within a few metres.
If the ASC warning light contin-
ues to flash:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
ASC deactivated
The ASC telltale and warn-
ing light lights up.
Possible cause:
The rider has switched off the
ASC system.
Switch on the ASC function.
ASC fault
The ASC telltale and warn-
ing light lights up.
Possible cause:
The ASC control unit has detec-
ted a fault. The ASC function is
not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault (
112).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
3
37
z Status indicators